AC100+ GOLD 9.5 OZ QUICK-SHOT VINYLESTER INJECTION ADHESIVE ANCHORING SYSTEM - Darragh

AC100+ GOLD 9.5 OZ QUICK-SHOT VINYLESTER INJECTION ADHESIVE ANCHORING SYSTEM

Dewalt

397030

8478SD-PWR

Description

The AC100+ Gold is a two-component vinylester adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The adhesive is designed for bonding threaded rod and reinforcing bar elements into drilled holes in concrete and masonry base materials. It can be considered for use in solid base materials as well as hollow base materials with screen tubes.

Key Features

  • Designed for use with threaded rod and reinforcing bar hardware elements
  • Consistent performance in low and high strength concrete
  • Evaluated and recognized for freeze/thaw performance
  • Evaluated and recognized for a range of embedments
  • Versatile low odor formula with optimized cure time
  • Evaluated and recognized for long term and short term loading
  • Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
  • Cartridge design allows for multiple uses using extra mixing nozzles
  • Universal product for concrete and masonry (hollow and solid base materials)

Instructions

  1. Remove piston plug assembly from the depleted cartridge.
  2. Load a new cartridge into dispensing tool (without new mixing nozzle).
  3. Remove cap and balance cartridge by dispensing adhesive until both components are flowing separately and equally through the cartridge opening. Suggest removing any excess adhesive from cartridge opening prior to the next step.
  4. Attach nozzle of piston plug assembly to the balanced cartridge.
  5. Resume dispensing and placement of adhesive into hole. 

*For more information see installation documentation. 

Applications

  • Bonding threaded rod and reinforcing bar into hardened concrete and masonry
  • Evaluated for use in dry and water-saturated concrete (including water filled holes)
  • Suitable to resist loads in cracked or uncracked concrete base materials
  • Adhesive system can be installed in a wide range of base material temperatures; qualified for structural applications in concrete and masonry as low as 14ºF (-10ºC)
  • Qualified for seismic (earthquake) and wind loading (SDC A - F)

Approvals

  • International Code Council, Evaluation Service (ICC-ES) ESR-2582 for concrete
  • International Code Council, Evaluation Service (ICC-ES) ESR-3200 for masonry
  • International Code Council, Evaluation Service (ICC-ES) ESR-4105 for Unreinforced Masonry (URM)
  • Code compliant with the 2021 IBC/IRC, 2018 IBC/IRC, 2015 IBC/IRC and 2012 IBC/IRC
  • Tested in accordance with ASTM E488 / ACI 355.4 and ICC-ES AC308 for use in structuralconcrete with design according to ACI 318 (-19 & -14) Chapter 17 and ACI 318 Appendix D
  • Tested in accordance with ICC-ES AC58 and ICC-ES AC60 for use in masonry walls
  • Compliant with NSF/ANSI Standard 61 for drinking water system components – health effects
  • Compliant to California DPH for VOC emissions and South Coast AQMD for VOC content (LEED v4.1)
  • Conforms to requirements of ASTM C881 including C882 and AASHTO M235, Types I, II, IV and V, Grade 3, Classes A & B (meets Type III with exception of elongation)
  • Department of Transportation listings – see www.DEWALT.com or contact transportation agency
Item Description
397060 AC200+ 9.5 FL OZ EXPOXY INJECTION ADHESIVE ANCHORING SYSTEM & POST-INSTALLED REINFORCING BAR CONNECTION
399055 STANDARD 10:1 MANUAL DISPENSER 28 OZ
MA_397035 PURE100+ EPOXY INJECTION ADHESIVE QUICK-SHOT CARTRIDGE 1:1 MIX RATIO (MULTIPLE SIZES AVAILABLE)

This download is available in more than one file format. Please select the file format you want to download.

Pending Reviews

Customers Also Bought...
PROFESSIONAL CAULK GUN 10OZ

Kraft Tool

448030

GG279

10OZ CAULK GUN WEXFORD-SKELETON

COX

448003

41001B

10OZ CAULK GUN CHILTON-12:1 RATIO

COX

448005

41004